Showing 2 results for Polyethylene Glycol
Ramin Dehghani, Seyed Mojtaba Zebarjad,
Volume 21, Issue 3 (9-2024)
Abstract
Acrylic resins are one of the most important thermoplastic resins used in various industries due to their significant properties. However, they are inherently brittle and addition plasticizers to them is very common. In this study, role of both Polyethylene Glycol (PEG) and Triacetin on the mechanical properties of acrylic resin have been investigated. To do so tensile test, bending and wear tests have been performed. To achieve the optimal mixture of plasticizers, a tensile test has been carried out, and the best percentage of the mixture has been determined. Subsequently, bending and wear tests were conducted, which showed a significant increase in the bending strength of the acrylic resin after the addition of plasticizers. Furthermore, it was found that the abrasion mechanism of the resin was significantly altered compared to its pure state.
Fatemeh Rafati, Narges Johari,
Volume 22, Issue 3 (9-2025)
Abstract
It must be recognized that the degree of this factor will influence how well wound-healing materials perform water absorption, protein interaction, and cellular adhesion. In the present study, we are concerned with studying the effects of polyethylene glycol (PEG) and curcumin (Cur) on the hydrophilicity of silk fibroin (SF)/linen (LN) composite films. The SF and LN composite films were blended at an equal mass ratio of 1:1, and PEG and Cur were also added to induce changes in surface properties. Fourier-transform infrared analyses showed that intermolecular interactions and hydrogen bonding were formed among the components in the blends. There was a very obvious hydrophobicity reduction by the addition of Cur and PEG/Cur, as exemplified by the static water contact angle measurements: simply addition of Cur to SF lowered the contact angle from approximately 100° to 72°, whereas a co-addition of PEG and Cur produced the greatest reduction (64°), equalling 70%. The synergistic effect in the surface wettability enhancement occurs because both additives introduce polar moieties onto the surface and partially disrupt the SF crystalline structure. Water uptake and cell viability tests further verified the hydrophilicity and biocompatibility of PEG/Cur-modified SF/LN films. This promotes the use of PEG/Cur-modified SF/LN blends as hydrophilic, bioactive materials suited for advanced wound dressing and tissue engineering scaffolds.
